The MSR Reactor Stove is the best gas stove set for hiking and trekking holidays that I have come across so far. However, this only applies on condition that you don’t want to make pancakes in the morning and only need to cook for yourself.
With the MSR Reactor Stove we have also heated up pasta with chili for 3 people in batches, but for longer tours that is certainly not recommended and also quite time-consuming.
For packing, you can fit the stove, a gas cartridge and a tea towel into the pot of the cook set. I have also carried a (folding) spork and a small salt and pepper shaker in it. If you pack cleverly, a second spork and other “bits and pieces” will surely fit in the pot too.
The MSR Reactor Stove is very simple to operate and use. Just open the gas cartridge, hold a lit lighter to the designated spot and turn up the regulator. The stove then heats up quickly – although this isn’t that easy to see because the “flame” is barely visible. But when you put the pot on, it is very obvious, because after about 30 seconds the burner glows red and the company logo shows up nicely in the middle.
The stove is said to keep working even at -15 °C, when many other gas stoves have already given up. I haven’t been able to try that myself yet. But having now tested the stove for 2 weeks in Canada, I can recommend it without hesitation.
If you want to see the MSR Reactor Stove in action, take a look at Odoo.tv, where there is a video test.
What comes with the MSR Reactor Stove
- 1.7 litre pot with integrated handle and lid
- tea towel (Packtowl Ultralite in small)
- instructions in various languages
Technical details of the MSR Reactor Stove
- Weight: approx. 540 g
- Burn time: approx. 80 minutes with a 227 g gas cartridge
- Boil time: 1 litre in approx. 3 minutes
What to do if the MSR Reactor Stove doesn’t start to glow
I was faced with this right after buying the MSR Reactor Stove. The burner simply would not start glowing red. Instead, it always had the blue warm-up flame. You can bring water to the boil with it, but it isn’t good for the pot – it gets dirty from the incomplete combustion.
To solve the problem, you simply take a lit match and push it under the upper grid.
Then carefully turn on the gas stove – and lo and behold – problem solved!
Where to buy
- Bergfreunde.de
